Top 7 BEST RTX 3090 Graphics Cards In 2023

Two years after the launch of Nvidia GeForce RTX 2000 graphics cards based on “Turing” architecture, Nvidia finally launched a new generation of GeForce RTX 3000 graphics cards from the Ampere generation led by GeForce RTX 3090 back in September 2020.

Current GeForce RTX 3000 graphics cards are based on the Ampere architecture built on Samsung 8nm lithography. Nvidia GeForce RTX 3000 series graphics cards come with lots of improvements on the architecture level – more than a 2-times increase in performance and around 1.9-times increase in power efficiency in ray tracing.

Here are all our picks summarized with comparison to each other:

Last update on 2023-12-13

If we look at the specifications of the GeForce 3090 Founder Edition, we are facing a beast of no less than 10496 CUDA Cores at a Base/Turbo frequency of 1400/1695 MHz with an FP32 performance of 36 TFLOPs (6 TFLOPs more than the GeForce RTX 3080; 16 TFLOPs more than the GeForce RTX 3070 and 22.55 TFLOPs more than the GeForce RTX 2080 Ti).

By any chance, if your budget is lower than RTX 3090 pricing, we recommend going through the Best RTX 3060 article. 

In RayTracing performance, we are talking about 69 TFLOPs (vs 58 TFLOPs for the RTX 3080; 40 TFLOPs for the RTX 3070) and 285 TOPs from the Tensor Core (vs 238 and 163 TOPs).

The GPU Core is attached to 24 GB of GDDR6X @ 19.5 GHz memory coupled with a 384-bit memory interface, giving us a bandwidth of 936 GB/s and a consumption of 350W powered by the already miraculous 12-pin PCI-Express connector. The power consumption on paper tastes like very little, knowing its performance, though you need at least an 850w power supply to run this beast, as under good condition, graphics card turbo boost varies from custom variants will consume around 415W.

Since its initial release, getting your hands on a GeForce RTX 3090 has been extremely challenging because of its availability and price. The silicon shortage and the sudden growth in cryptocurrency mining made it a nightmare to buy the GeForce RTX 3090 or any other 30 series card at MSRP. But the good news is that recently, prices have dropped significantly, thanks to the crypto market crash, making it easier to obtain a GeForce RTX 3090 at a price closer to MSRP or even lower in some cases. 

That being said, the Founder’s edition cards tend to provide lower clock speeds than some aftermarket cards, though you won’t see any significant performance difference. On the other hand, AIB partners’ graphics cards shine when it comes to better thermal performance and overclocking potential, thanks to beefy VRMs in comparison with Founder Edition.

Speaking of the custom variant from AIB partner of Nvidia, the GeForce RTX 3090 comes in different variants from various manufacturers; choosing between these variants can get challenging because of the sheer amount of cards available, which is why we are here with a list of the Best RTX 3090 Graphics card in 2023.

Best RTX 3090 Graphics Cards

Here are our picks for Best RTX 3090:

• EVGA GeForce RTX 3090 FTW3 Ultra Gaming
• Gigabyte GeForce RTX 3090 GAMING OC
• ASUS ROG STRIX NVIDIA GeForce RTX 3090 Gaming
• ASUS EKWB GeForce RTX 3090
• MSI Gaming GeForce RTX 3090 Gaming X Trio 24G
• ASUS ROG STRIX GeForce RTX 3090 White OC Edition

EVGA GeForce RTX 3090 FTW3 Ultra Gaming

Best Overall GeForce RTX 3090

Specifications: Dimensions: 30 x 14 x 5.6 cm| Boost Clock: 1800 MHz | Power Connectors: 3 x 8 pin | RGB: Yes | Display Outputs: 1 x HDMI 2.1, 3 x DisplayPort 1.4a | Recommended PSU: 750W

EVGA has established itself as a reputable figure in the gaming industry, known for excelling in manufacturing high-end GPUs. Although they have since ended their partnership with Nvidia, their 3000-series cards are still in stock on multiple websites, serving as a testimony to their once high-end desktop graphic cards that dominated the market with their otherworldly performance and exceptional cooling.

The EVGA GeForce RTX 3090 FTW3 sits at the high-end spectrum of EVGA’s GPUs, only lagging slightly behind the last-gen flagship GeForce RTX 3090 Ti. EVGA’s FTW3 series of GPUs have always managed to set themselves apart thanks to their over-the-top cooling solutions and aesthetically pleasing design. Fortunately, the EVGA GeForce RTX 3090 FTW3 Ultra Gaming is also no exception to this.

The card’s design seems to have received a complete overhaul, with each aspect of the visual appearance exhibiting an entirely different look than its predecessor. The changes become immediately apparent thanks to the massive RGB present that wraps around the front shroud. Moreover, an RGB “EVGA” logo surrounded with red stripes can also be found at the edge of the card.

All of its components are meticulously encapsulated in a matte-black cooler, rigidly being held into place by a metal backplate. The back plate itself has certain design characteristics, including red stripes along the edges as well as a mesh area for added ventilation. Its overall design remains sleek and stylish, providing a balance between RGB and minimalism.

Having said that, its cooling solution is where the EVGA GeForce RTX 3090 FTW3 truly shines EVGA has made use of its ICX3 interactive cooling system, which incorporates three 2nd gen HDB fans that come with reduced noise levels, 9 thermal sensors well as a huge heatsink. A total of six heat pipes can be seen running underneath the vapor chamber heatsink, ensuring effective heat dissipation at all times. 

Of course, its capabilities aren’t only limited to the cooling solution alone. EVGA has packed the FTW3 GeForce RTX 3090 with a 19+4 Phase VRM configuration, ensuring flawless power management. EVGA seems to have made efficient use of space on the PCB by also adding headers for additional fans.

Power limits have also received a significant bump compared to the competition, allowing you to take full advantage of its robust power delivery and outstanding cooling. With a maximum power limit of 500W and a base power limit of 420W, the EVGA GeForce RTX 3090 FTW3 Ultra Gaming is bound to impress you with its performance.

Speaking of performance, the card also features a boost clock speed of 1800 MHz, a fairly generous increase over the founder’s edition variant. The BIOS switch allows you to manually switch between three separate modes, each offering a different base clock speed.

What We Liked

EVGA’s FTW3 series of graphic cards have become a staple for premium air-cooled cards for all the right reasons. Their custom cooling solution allows the card to operate at moderately low temperatures, all the while boosting to insanely high clock speeds. The fact is then further reinforced by the numerous heatsinks and the 2nd gen HDB fans that drastically improve cooling performance.

EVGA’s ICX3 Cooling system seems to have taken a drastic leap over a single generation, adding a plethora of new features, which include the 9 thermal sensors for determining fan speeds as well as asynchronous fans. If jaw-dropping performance, exceptional cooling performance, and capable VRMs weren’t already enough, the EVGA GeForce RTX 3090 FTW3 Ultra Gaming also comes with a unique yet appealing design to accentuate the aesthetic of your build.

What Sets EVGA GeForce RTX 3090 FTW3 Ultra Gaming Apart From Its Competitors?

Cut-outs on the backplate improve airflow, lowering the temperatures significantly. Three 8-Pin connectors are a better inclusion than NVIDIA’s 12-Pin connector, which not only ruins the card’s look but also delivers less power.

While the EVGA GeForce RTX 3090 FTW3 Ultra Gaming is by no means a minimalistic card, it still features decent lighting effects along with a metal backplate.

Alongside that, the dual BIOS feature is very useful, allowing you to switch between two modes manually.

What We Disliked

Unsurprisingly, the EVGA GeForce RTX 3090 FTW3 Gaming is also plagued with some of the same issues as the other variants. Of course, that also includes a massive size, which limits its overall PC case compatibility. Taking 3 slots in your system for installation, the GeForce RTX 3090 FTW3 from EVGA is by no means a small card. It is worth checking your PC case requirements before finalizing your decision to purchase the card.

Verdict

The EVGA GeForce RTX 3090 FTW3 exceeds expectations in every way possible. From high power limits to fantastic performance, the card provides it all. Its phenomenal cooling system, combined with fantastic VRM thermals, gives it an edge over the competition, making it the Best Air-Cooled GeForce RTX 3090.

Gigabyte GeForce RTX 3090 GAMING OC

Best GeForce RTX 3090 For Mining

Specifications: Dimensions: 32.0 x 12.9 x 5.7 cm | Boost Clock: 1755 MHz Power Connectors: 2 x 8 PIN | RGB: Yes | Display Outputs: 2 x HDMI 2.1, 3 x Display Port 1.4a Recommended PSU: 750W | Warranty: 4 Years

While the GeForce RTX 3090 is a beast when it comes to gaming, it is capable of much more than just gaming. The GeForce RTX 3090 can also act as a workstation GPU due to its 24 GB of GDDR6X memory and high core clocks.

Gigabyte Gaming series graphics cards never failed to impress; GPU under gaming lineup comes with focus on the gaming aspect at the same time touching pricing at the bottom of the range in comparison with Aorus series focused on hardcore gamers and Overclockers.

The Gigabyte GeForce RTX 3090 GAMING OC features a rather unique simple look with a sharp cut on top of the last fan. The card uses Gigabyte’s WINDFORCE 3x cooling system, consisting of a total of three fans, with the two fans on the right being 90mm and the fan on the far left being 80mm.

Much like the rest of the 30-series cards from gigabyte, the fan in the middle spins opposite to the other two fans, improving the airflow pressure.

Power consumption on the GeForce RTX 3090 GAMING OC is also not a joke, with an average power consumption of 350W. A 750W GOLD-rated PSU is recommended for the GeForce RTX 3090 GAMING OC from Gigabyte.

The reduced fan size of the last fan is due to the card’s unique design. Moving on to the back of the card, it is fully covered with a metal back plate with Gigabyte branding on top of it. Support for Dual GPUs is also available through NVIDIA NVLINK.

In terms of the RGB, there is not much of it aside from a single strip of LED on top of the card and the gigabyte logo, which also lights up. Furthermore, the RGB is fully compatible with RGB fusion 2.0

For the VRM, Gigabyte has used a 19-phase power design in a 15+4 configuration. Overall, it manages to maintain decent VRM temperatures because of the beefy heatsink.

Moving on to the rear of the card, it features two HDMI 2.1 ports along with 3 Display 1.4a ports. However, you are limited to four monitors, even with five display outputs. Power is delivered using two 8-PIN power connectors. 

What We Liked

As the name suggests, the Gigabyte GeForce RTX 3090 GAMING OC is an overclocked version of the 3090; it features a boost clock of 1755 MHz which is more than the reference GeForce RTX 3090. 

Moreover, it provides excellent gaming performance, as you would expect from a GeForce RTX 3090. Surprisingly, the Gigabyte GeForce RTX 3090 GAMING OC stays relatively silent even under extreme load compared to other variants of the GeForce RTX 3090.

What We Disliked

One thing that the GeForce RTX 3090 GAMING OC from Gigabyte did lack was RGB. With only a single strip and an RGB logo on top of the card, we wish there was more of it. 

Other than that, much like the rest of the GeForce RTX 3090 cards, the Gigabyte GeForce RTX 3090 GAMING OC consumes a lot of power, especially if you are planning on using it for mining.

What Sets The Gigabyte GeForce RTX 3090 GAMING OC Apart From Its Competitors?

Its unique design stands out about the Gigabyte GeForce RTX 3090 GAMING OC. One thing that is not seen in a lot of GeForce RTX 3090s is a complete metal back plate. Moreover, the metal backplate has an open cut-out improving the overall airflow of the card. 

The triple-fan design with the alternate spinning fan also helps reduce the temperatures. While most 3090 cards feature a total of 5 display outputs, gigabyte has added HDMI port which is a nice inclusion.

Verdict

The Gigabyte GeForce RTX 3090 GAMING OC is an incredibly powerful card. Because of its design, it manages to stay fairly cool even under maximum load. 

To sum up, Its higher core clocks and stable boost frequencies coupled with low temperatures make it the Best GeForce RTX 3090 For Mining.

If you are interested in mining, you may also check our article on The Best Motherboard For Mining.

ASUS ROG STRIX NVIDIA GeForce RTX 3090 Gaming

GeForce RTX 3090 With Best Overclocking

Specifications: Dimensions: 34.0 x 14 x 5.7 cm | Boost Clock: 1890 MHz Power Connectors: 3 x 8 PIN | RGB: Yes | Display Outputs: 2 x HDMI 2.1, 3 x Display Port 1.4a Recommended PSU: 850W | Warranty: 3 Years

ASUS is famous for making some of the most powerful GPUs in the market, pushing the GPUs to their very limits. If you’re someone who wants to get the most out of their graphics card, then going with ASUS will never disappoint you.

The ASUS ROG STRIX GeForce RTX 3090 follows the same trend as the other GPUsfrom ASUS, it boasts clock speeds up to 1890MHz, which is one of the highest boost clock speeds seen in a GeForce RTX 3090.

Compared to the previous generation of ROG STRIX CARDS, the design has received a major overhaul, with a blend of black and grey at the front.

In addition to the high clock speeds, the ASUS ROG STRIX GeForce RTX 3090 features a triple fan design, with the center fan spinning in an alternate direction for maximum airflow.

To fully support the newer Ampere architecture, ASUS has used an enlarged heatsink with a footprint of 2.9 slots.

The ASUS ROG STRIX GeForce RTX 3090 features an RGB strip on top of it, moving across the entire card. The RGB LEDs are compatible with ASUS armory crate software and can be synced with other components as well.

As expected from a GeForce RTX 3090, the card itself is gigantic. It uses three 90mm Axial-tech fans. They now have an increased blade count of 13 on the center fan and 11 on the other two.

As far as the rear I/O is concerned, ASUS has used a steel bracket for the I/O, with a total of two HDMI 2.1 ports and 3 display ports.

An additional bios switch is included, which lets you choose between a quiet mode or a performance model. As the name suggests, a quiet BIOS allows you to run the fan at lower speeds, reducing the overall noise level.

In addition, the GPU uses a total of 18 power phases for the VRMs, which do an excellent job of maintaining stable voltages.

Surprisingly, ASUS has added two fan headers to the back of the card, which can prove useful, especially when dealing with occupied fan headers. These fan headers can obviously be used to connect additional case fans.

Removing the cooler reveals the massive heatsink with dense aluminum fins. It uses an enlarged copper baseplate along with multiple heat pipes around it.

You can also check our review for the previous flagship card from ASUS, the ROG STRIX GeForce RTX 2080 Ti o11G.

What We Liked

The ASUS ROG STRIX GeForce RTX 3090 is jam-packed with features. This card variant is one of the best for consumers, with high boost clock speeds of up to 1890 MHz. 

Moreover, the ASUS ROG STRIX GeForce RTX 3090 is an absolute beast in terms of gaming performance. It also manages to maintain decent thermals during memory-intensive tasks.

ASUS has done an excellent job with the design of the ROG STRIX GeForce RTX 3090. The clean front 90mm fans and the sleek RGB on the edge of the card make the design stand out from the other variants.

What We Disliked

Surprisingly, the ASUS ROG STRIX GeForce RTX 3090 outperforms most variants of the GeForce RTX 3090; however, this performance does come with a hefty price tag.

The ASUS ROG Strix GeForce RTX 3090 is also one of the more expensive variants of the GeForce RTX 3090. Its high price, coupled with the already soaring GPU prices, makes it hard to obtain. 

What Sets The ASUS ROG STRIX GeForce RTX 3090 GAMING Apart From Its Competitors?

ASUS has packed a lot of features with the ROG STRIX GeForce RTX 3090. ASUS has gone as far as to include a dual BIOS switch with the ROG Strix GeForce RTX 3090, which is not seen in most variants of the GeForce RTX 3090. 

Another thing that stands out about the ROG Strix version of the GeForce RTX 3090 is the addition of two USB headers; while it is not a game-changer, it is always nice to see extra fan headers.

Verdict

In conclusion, the ASUS ROG STRIX GeForce RTX 3090 GAMING is an excellent choice for anyone focused on the performance side of things. 

It provides high boost clocks while maintaining low temperatures, which is why we have crowned the ASUS ROG STRIX GeForce RTX 3090 as the GeForce RTX 3090 With The Best Overclocking Potential.

ASUS EKWB GeForce RTX 3090

Best Water-Cooled GeForce RTX 3090

Specifications: Dimensions: 21.6 x 13.62 x 1.98cm| Boost Clock: 1725 MHz Power Connectors: 2 x 8 PIN | RGB: Yes | Display Outputs: 1x HDMI 2.1, 3 x Display Port 1.4a Recommended PSU: 750 | Warranty: 3 Years 

One thing we all can agree upon is the massive power consumption of the newer GeForce RTX 3000 series, particularly the GeForce RTX 3090. With a rated TDP of 350W, the GeForce RTX 3090 is one of the most power-hungry cards available on the market.

The enormous power consumption coupled with 24 GB of GDDR6X VRAM has significantly increased temperatures. This is why ASUS has partnered up with EK to provide us with the ASUS EKWB GeForce RTX 3090, a water-cooled version of the GeForce RTX 3090.

Water cooling is arguably the best method of cooling your PC components. You can also check out the Best Water Cooling Cases and The Best Water Cooling Kits if you are considering getting a Water-Cooled GeForce RTX 3090.

The card itself is extremely compact compared to other variants of the GeForce RTX 3090. The fan-less design of the ASUS EKWB GeForce RTX 3090 has made it relatively small, which improves the PC case compatibility.

Looking at the PCB, the GeForce RTX 3090 houses a ton of electrical components on a relatively small PCB, with some components situated behind the PCB because of the lack of space.

The back of the PCB is covered with an aluminum backplate that also acts as a support for the PCB. ASUS has used a stainless steel mounting bracket with a total of 3 Display ports along with 1 HDMI port.

Addressing the elephant in the room, the EK water block present on top of the PCB does a great job of significantly reducing the overall temperatures. The water block features the EKWB Open split cooling engine which provides an unrestricted flow for the coolant.

Speaking of the water block, an addressable RGB strip is present beneath the block which illuminates the entire block. 

Power is delivered using two 8-pin power connectors. Furthermore, it has a boost clock speed of 1725 MHz in OC mode and 1695 MHz in Gaming Mode.

What We Liked

The single-slot design makes it one of the smallest GeForce RTX 3090 cards currently available. The card itself is built extremely well with almost no design flaws. In addition, the aluminum backplate does a great job of protecting the back of the PCB.

 Moreover, the included RGB at the bottom of the card was a nice addition by ASUS. The RGB is also compatible with Aura Sync, allowing you to fully customize the lighting effects.

What We Disliked

Water Cooled GPUs generally come at an extremely high price, that remains true with the ASUS EKWB GeForce RTX 3090 Gaming. Water Blocks simply cost more than traditional air cooling methods making the ASUS EKWB GeForce RTX 3090 Gaming extremely expensive.

While water cooling is incredibly effective and does a great job in keeping the temperatures low,  the big price hike for a small performance gain might not be for everyone.

What Sets The ASUS EKWB GeForce RTX 3090 GAMING Apart From Its Competitors?

As mentioned previously, most GeForce RTX 3090 cards feature massive heatsinks with triple fan designs. That is not the case with the ASUS EKWB GeForce RTX 3090, it offers unrestricted PC case compatibility with its single-slot design.

Aside from its small form factor, the ASUS EKWB GeForce RTX 3090 offers low temperatures with better performance than the founder’s edition version of the GeForce RTX 3090.

Overall, the ASUS EKWB GeForce RTX 3090 will make a great addition to your custom water-cooled PC.

Verdict

The ASUS EKWB GeForce RTX 3090 is for those who want to opt for a pre-installed water block to save the hassle of installing one themselves. So far, the collaboration between ASUS and EK has proved to be a success.

We have deemed the ASUS ROG STRIX GeForce RTX 3090 as the Best Water-Cooled RTX 3090 because of its hassle-free installation, low temperatures, and overall decent performance.

MSI Gaming GeForce RTX 3090 Gaming X Trio 24G

Best GeForce RTX 3090 For Gaming

Specifications: Dimensions: 33.5 x 14 x 5.6cm| Boost Clock: 1785 MHz Power Connectors: 3 x 8 PIN | RGB: Yes | Display Outputs: 1x HDMI 2.1, 3 x Display Port 1.4a Recommended PSU: 750W | Warranty: 3 Years

MSI’s Gaming GeForce RTX 3090 Gaming X Trio 24G has similar specifications on paper to the founder’s edition of the GeForce RTX 3090. The design and clock speed is where MSI’s variant of the GeForce RTX 3090 differs from the founder’s edition.  

The MSI GeForce RTX 3090 GAMING X Trio 24G features MSI’s TORX fan 4.0 design, with a total of three 90mm fans; it features boost clock speeds ranging from 1785 MHz to 1810 MHz which is a fair upgrade from the founder’s edition.

Unlike the founder’s edition, which uses a 12-pin power connector to deliver all of the power, MSI has gone with three 8-PIN power connectors that look much cleaner than the 12-pin power connectors used in the founder’s edition.

It uses a 14-phase power design for its VRMs with a different configuration than the founder’s edition boards. Additionally,  A three-phase design is used for the memory voltage.

For anyone concerned about the RGB, the MSI GeForce RTX 3090 Gaming X Trio comes with a lot of it. With a strip present at the edge of the backplate along with an MSI logo that also lights up.

The backplate comes with a solid back plate with MSI branding on top of it; the backplate itself is made out of Graphene, which is said to be much stronger than plastic.

One thing that is apparent right of the bat is the sheer size of the MSI GeForce RTX 3090 Gaming X Trio 24G. The card has a huge footprint.

Since the card is very heavy, MSI has included an anti-bending strap to avoid any kind of bending on the card. Moreover, MSI has also allowed users to add a support bracket to avoid GPU sagging.

For the I/O, MSI has included a single HDMI 2.1 port along with three Display Ports. Again, this is the same amount of ports found on the founder’s edition.

Also, check out our review of the MSI GeForce RTX 3090 Gaming X Trio 24G, which takes an in-depth look at the card.

What We Liked

With the MSI GeForce RTX 3090 Gaming X Trio, they have focused on the airflow aspect of the card. MSI has used their improved TRI FROZR 2 Thermal design, offering better airflow.

In addition to its better airflow, the MSI GeForce RTX 3090 Gaming X Trio runs extremely silent even under maximum load. The low noise levels are achieved using the improved thermal design of the Gaming X Trio cards.

What We Disliked

The MSI GeForce RTX 3090 Gaming by no means is a small GPU featuring a 3-slot design; the GeForce RTX 3090 Gaming X Trio is absolutely gigantic. Fitting the Gaming X Trio in small form factor cases is completely out of the question.

While MSI has advertised the Gaming X Trio’s improved airflow, it still falls short in terms of its overclocking capabilities. It has boost clock speeds of 1785 MHz which is not a major improvement from the founder’s edition.

What Sets The MSI Gaming GeForce RTX 3090 Gaming X Trio 24G Apart From Its Competitors?

While MSI has not added anything out of the ordinary with the GeForce RTX 3090 Gaming X Trio, it still consists of its fair share of features. 

Starting with the design, MSI has really pushed the “gamer” aesthetic with the Gaming X Trio, which is expected, given that the name includes gaming in it. With that name comes a lot of RGB, which can be a nice inclusion for anyone interested.

The RGB can also be controlled using RGB Mystic Light. According to MSI, they have added additional fuses into the PCB for extra protection. Speaking of the PCB, it is made out of copper and offers improved heat dissipation.

Verdict

Ultimately, the MSI Gaming GeForce RTX 3090 Gaming X Trio is not a major improvement from the founder’s edition; however, it does improve in some aspects, most notably the fan design and airflow.

We have deemed the MSI GeForce RTX 3090 Gaming X Trio 24G as the Best RTX 3090 For Gaming Due to its overall gaming aesthetic and silent operation speeds.

ASUS ROG STRIX GeForce RTX 3090 White OC Edition

Best GeForce RTX 3090 For White Build

Specifications: Dimensions: 34.0 x 14 x 5.7 cm | Boost Clock: 1890 MHz | Power Connectors: 3 x 8 PIN | RGB: Yes | Display Outputs: 2 x HDMI 2.1, 3 x Display Port 1.4a Recommended PSU: 850W | Warranty: 3 Years

The previously mentioned ASUS ROG STRIX GeForce RTX 3090 is back with a clean white finish which looks amazing aesthetically and performs significantly better than the founder’s edition version of the GeForce RTX 3090 because of its higher clock speeds.

The ASUS ROG STRIX GeForce RTX 3090 features a boost clock speed of 1890 MHz, which is quite an improvement over the reference card. Moreover, the white version of the card comes with a new white paint job with a neat finish.

Aesthetically, ASUS has done an incredible job with the white finish on this card. For the fans, ASUS has used their Axial-tech fan design with the center fan spinning in the opposite direction.

An RGB strip is present on top of the card, which has a nice design. Much like the rest of the cards from ASUS, it is compatible with the armory crate software.

Staying true to its white nature, the backplate also has a neat white finish with vents present on the backplate to improve airflow. A dual bios switch can also be found on the back. ASUS has included a stainless steel I/O with two HDMI ports and 3 Display ports.

If you are considering getting the white version of the ASUS ROG STRIX GeForce RTX, then you should pair it with a white PC case. You can check out our article on the Best White PC Cases to get an idea of the best white cases you can currently purchase.

Much like its black variant, the ASUS ROG STRIX GeForce RTX 3090 White OC also uses an 18-phase design for the VRM.

If you are going for an all-white build, you may also read our article on the Best White CPU Coolers.

What We Liked

The ASUS ROG STRIX GeForce RTX 3090 White OC Edition proves to be one of the better-performing variants of the GeForce RTX 3090.

Not only does the ROG STRIX variant outperform the founder’s edition, but it also manages to surpass some of the higher-end variants. The higher performance s achieved using a factory overclock and great cooling solutions.

What We Disliked

The ASUS ROG Strix GeForce RTX 3090 has a 2.9 slot design, the card itself is massive, making it difficult to fit into smaller cases.

The ROG Strix GeForce RTX 3090 is priced much higher than the founder’s edition of the GeForce RTX 3090. That, on top of the GeForce RTX 3090 availability makes it difficult to obtain this card.

What Sets The ASUS ROG STRIX GeForce RTX 3090 White OC Edition Apart From Its Competitors?

The aesthetics stand out the most about the newer white edition of the ROG STRIX GeForce RTX 3090. The simple white design coupled with the LED strip on the edge of the card makes it a great addition to an all-white rig.

The Dual BIOS Switch found on the back of the card can be used to switch between the two modes. Additionally, the fans come with a higher blade count than the previous models.

Verdict

The ASUS ROG Strix GeForce RTX 3090 White OC Edition is an excellent pick for anyone looking to pair it with an-all white build with white components, which is why we have picked it as the Best RTX 3090 For White Build.

Competition

EVGA GeForce RTX 3090 KINGPIN Hybrid Gaming

Runner-Up For The Best GeForce RTX 3090 For Overclocking

Specifications: Dimensions: 30.2 x 13.7.8 x 5.3 cm| Boost Clock: 1920 MHz Power Connectors: 3 x 8 PIN | RGB: Yes | Display Outputs: 1x HDMI 2.1, 3 x Display Port 1.4a Recommended PSU: 850W

EVGA’s KINGPIN lineup of graphic cards is known for its extreme overclocking capabilities and high clock speeds. The EVGA GeForce RTX 3090 KINGPIN Hybrid Gaming follows the same trend. It is undoubtedly one of the best-performing variants of the Nvidia GeForce RTX 3090.

The EVGA GeForce RTX 3090 KINGPIN features a rather unique design; with a single 90mm fan, the card itself is attached to a 360mm radiator. Both the card and the 360mm radiator come with an all-black finish.

It is also worth mentioning that the EVA GeForce RTX 3090 KINGPIN is a factory-overclocked card with boost clock speeds up to 1920 MHz.

Much like the previous 2080 Ti KINGPIN, the EVGA GeForce RTX 3090 KINGPIN comes with an AIO liquid cooler; however, the newer GeForce RTX 3090 KINGPIN has a 360mm AIO instead of a 240mm radiator.

The PCB is where things take a different turn; unlike the GeForce RTX 3090 founder’s edition, the EVGA GeForce RTX 3090 KINGPIN consists of a 12-layer PCB and a 23-phase VRM design.

Moving on to the I/O, it consists of a total of three display 1.4a ports along with a single HDMI 2.1 port. Since the GeForce RTX 3090 supports a maximum of four displays simultaneously, this should be more than enough.

An OLED screen is on the top right corner of the card, with a resolution of 176 x 48 pixels. The screen uses a silver hinge and can be turned 180 degrees to place it at an angle of your choice.

Power is fed using three 8-pin connectors capable of delivering up to 450W of power. Furthermore, a triple bios switch is also present, allowing you to switch between three separate modes. The three modes are Normal, OC, or LN2 modes.

What We Liked

The EVGA GeForce RTX 3090 KINGPIN Hybrid Gaming offers remarkable performance right out of the box due to its high boost frequencies of 1920 MHz. It can be further overclocked to insane clock speeds, capable of shattering records.

As far as the width of the card is concerned, it takes a total of 2 slots which is smaller than most variants. The 360mm radiator and the 90mm fan on the card do a great job of keeping the temperatures low.

While the reference GeForce RTX 3090 uses 20-phase VRMs, the EVGA GeForce RTX 3090 KINGPIN Hybrid Gaming takes it up a notch by providing 23 phases. The bios switch was also an excellent inclusion.

What We Disliked

While most variants of the GeForce RTX 3090 are available at a price closer to the reference edition of the card, the EVGA GeForce RTX 3090 KINGPIN Hybrid Gaming has a significant price hike compared to the reference card. 

The higher price is expected, given the number of upgrades it provides over the founder’s edition.

What Sets The EVGA GeForce RTX 3090 KINGPIN Hybrid Gaming Apart From Its Competitors?

The EVGA GeForce RTX 3090 KINGPIN is directed towards enthusiasts that are looking to overclock their GeForce RTX 3090 to its very limit. This much overclocking potential has been unheard of before the launch of the GeForce RTX 3090 KINGPIN.

The OLED screen offers a lot of functionality, allowing you to monitor the temperatures, clock speeds, or voltages. A total of 3 custom GIFs can also be displayed aside from the 6 default animations.

Verdict

While the name itself is a bit of a mouthful, EVGA’s brand new GeForce RTX 3090 is a well-built card, delivering unfathomable performance because of its 12-layer PCB, unique 23-phase VRM design, and the 360mm radiator to cool it all down.

The EVGA GeForce RTX 3090 KINGPIN Hybrid Gaming is packed with features. The sheer amount of performance it is capable of delivering makes this beast of a GPU the Runner-Up For The Best RTX 3090 for overclocking.

What is RTX 3090

The GeForce RTX 3090 is a high-end consumer graphics card from Nvidia based on the Ampere architecture. Making use of 2nd Generation RT cores and the improved GDDR6X memory, the GeForce RTX 3090 targets native 4K gaming.

It is undoubtedly one of the fast GPUs one can currently purchase. As the name suggests, the GeForce RTX 3090 can handle ray tracing. It comes with 24 GB of GDDR6X memory and a boost clock speed of 1.7 GHz.

The GeForce RTX 3090 packs all the features you would need, providing blistering fast clock speeds and excellent performance capable of running games at 4k 60fps. Nvidia’s DLSS technology can also be a game-changer when using higher resolutions.

How We Chose Best RTX 3090 Graphics Cards

You need to keep a few things in mind before purchasing the GeForce RTX 3090.

Clock Speeds:

The card’s Clock speed is essentially the speed at which the card operates. For reference, the founder’s edition of the GeForce RTX 3090 comes with a boost clock speed of 1695 MHz.

Aftermarket cards come with varying clock speeds, some are even overclocked right out of the box. Alternatively, cards can also be overclocked, increasing their clock speeds; however, you would need a beefy cooling solution to overclock the GeForce RTX 3090.

While higher boost clock speeds will increase the performance, for average gamers, higher boost frequencies will not have a huge impact on performance.

The standard boost frequencies of the GeForce RTX 3090 should be more than enough to provide a flawless gaming experience.

Cooling

The cooling solutions your new GeForce RTX 3090 uses can heavily impact the performance and life span of the card, which is why you need to make sure the variant you end up going with delivers suitable cooling performance

Furthermore, the thermal performance of the card plays a huge part in determining its overclocking capabilities, reaching high core clocks is almost impossible with high temperatures.

Graphic cards mentioned in this article use different cooling methods, some of which use water blocks or even AIO liquid coolers.

Compatibility

Since most variants of the GeForce RTX 3090 are extremely large in size, you need an adequate case to install the card in. Pairing the GeForce RTX 3090 with a small form factor case is completely out of the question.

Compatibility also deals with the number of display ports present in a particular card. While the GeForce RTX 3090 supports four displays at a time, some variants include more than four ports.

Price

The GeForce RTX 3090 delivers phenomenal performance; however, its performance comes at a premium price with some variants even going above the MSRP.

While most variants are priced similarly, some higher-end variants of the GeForce RTX 3090 have a higher price than the founder’s edition of the card because of their better cooling solutions, VRMs, and higher clock speeds.

Design

When considering the GeForce RTX 3090, It is important that the design of your brand new card matches the aesthetic of your build. While most of it is down to your personal preference, you can check still check if the design meets your requirements.

For instance, people interested in RGB can skip over the non-RGB variants of the card. Color can also be an important factor for most people to match their build’s theme.

Warranty:

Manufacturers such as ASUS, MSI, and Gigabyte are responsible for the warranty of your card, taking a look at the card’s warranty before purchasing it should be the right thing to do. This also applies to the rest of your components.

RTX 3090 Founders Edition Vs. Custom AIB Variants

Nvidia’s reference cards for the RTX 3000 series have drastically improved over the previous generation, with better cooling solutions and improved design. While it is clear that Nvidia has improved, Custom AIB coolers seem to take the lead in terms of performance.

To get a better understanding of the reference card, let’s take a look at its specifications. The reference card features a two-fan design with one fan situated on the opposite side of the card to improve the airflow.

It boasts clock speeds of 1695 MHz and maintains solid temperatures even under load.

Going for custom AIB variants of the GeForce RTX 3090 opens up many options, allowing you to go for the one that meets all your requirements. Moreover, custom AIB GPUs usually come with an increased boost clock speed and better cooling solutions.

To sum up, the reference edition of the card is the most basic version of the GeForce RTX 3090 you can purchase. Most Aftermarket cards tend to improve upon Nvidia’s reference card; however, they might be priced at a higher point as well.

RTX 3090 Power Supply Recommendation

As mentioned previously, the GeForce RTX 3090 consumes a ton of power. It consumes 350 watts of power, which is when you don’t plan on overclocking it. Upon overclocking, it is capable of consuming 450W of power.

Its insane power consumption makes it clear that you would require a monstrous Power Supply in order to run the GeForce RTX 3090. The recommended power supply for RTX 3090 is a 750W 80 Plus GOLD PSU, that is if you don’t plan on overclocking your GPU.

The GeForce RTX 3090 Power Consumption can vary depending on its clock speeds. With an overclocked Geforce RTX 3090, it is recommended that you use an 850W Gold Rated PSU.

RTX 3080 Ti vs RTX 3090

Uncovering the specifications of the Geforce RTX 3080 TI, it has a Boost Clock of 1665 MHz, with a whopping 10240 Cuda cores. It comes with 80 RT Cores compared to 82 RT cores on the GeForce RTX 3090 along with 320 Tensor cores.

One major difference between the two is in the memory, While the GeForce RTX 3090 has 24 GB of GDDR6X memory, the GeForce RTX 3080 Ti on the other hand only has half of that, with a total of 12 GB of GDDR6X memory.

Looking at the specifications alone, it is clear that the GeForce RTX 3090 is better than the GeForce RTX 3080 TI; however, it is not by a huge margin. Another thing worth mentioning is that the GeForce RTX 3080 Ti has a slightly lower TDP of 320W.

It is also worth pointing out that the GeForce RTX 3090 is more than a gaming GPU, capable of handling productivity tasks efficiently.

Comparing the GeForce RTX 3080 Ti with the GeForce RTX 3090, it is clear that the GeForce RTX 3090 is the clear winner; however, that does come with a massive price hike over the GeForce RTX 3080 Ti.

RTX 3080 vs 3090

The GeForce RTX 3080 and the GeForce RTX 3090 are both based on the Ampere architecture, making use of the newer GDDR6X memory. The GeForce RTX 3090, being the higher-end card, outperforms the GeForce RTX 3080 in almost every scenario.

Comparing the specifications, the GeForce RTX 3080 comes with 8704 Cuda cores, 68 RT cores, 10GB of GDDR6X memory, and a memory bandwidth of 760 Gb/s. The GeForce RTX 3090, on the other hand, features 10496 Cuda cores, 82 RT Cores 24 GB of GDDR6X memory, and a memory bandwidth of 936 GB/s.The specifications alone indicate the performance difference between the two cards.

Simply put, the GeForce RTX 3090 has a massive lead over the GeForce RTX 3080 in raw performance; however, that comes with a significant price increase over the GeForce RTX 3080.

Furthermore, the GeForce RTX 3080 comes with a slightly lower TDP of 320W compared to the 350W TDP on the GeForce RTX 3090.Even with the upgrades that the GeForce RTX 3090 provides over the GeForce RTX 3080, there is only a 10-15 percent difference in the gaming performance between the two cards.

Productivity is where the GeForce RTX 3090 truly shines, with a massive lead over the GeForce RTX 3080 in most cases. It should be an excellent pick for content creators dealing with demanding workloads.

In conclusion, if you are only interested in gaming, then the GeForce RTX 3080 will provide better value for your money; however, for GPU-heavy productivity tasks, the GeForce RTX 3090 is the way to go.

RTX 3090 vs RX 6900 XT

The RX 6900 XT competes directly with the GeForce RTX 3090 in terms of its performance. Much like the GeForce RTX 3090, the RX 6900 XT targets 4k Gaming. It provides similar performance levels to the GeForce RTX 3090 in most games.

The RX 6900 XT comes with 16 GB of GDDR6, a memory bandwidth of 512 GB/s and a 384-bit memory bus. Furthermore, it comes equipped 5376 Cuda cores, 80 RT cores, and 80 Compute units.

Compared to that, the GeForce RTX 3090 makes use of the much faster GDDR6X memory; it also comes with 24 GB of it, which is a 6GB increase over the RX 6900 XT. In addition to that, the GeForce RTX 3090 also doubles the number of Cuda cores, featuring a total of 10496 Cuda cores.

In terms of the TDP, the RX 6900 XT has an average power consumption of 300W, which is 50W lower than the 350W TDP on the GeForce RTX 3090.

One thing to keep in mind is that you will be missing out on features such as DLSS, which can be a game changer, especially when playing on higher resolutions. While FSR is catching up, it still come nowhere close to the performance DLSS delivers.

Moreover, when it comes to Ray Tracing, the RX 6900 XT fails to compete with the GeForce RTX 3090, falling behind the GeForce RTX 3090 in almost every game using Ray Tracing.

The RX 6900 XT utilizes SAM (Smart Access Memory) when paired with a Ryzen 5000 series processor, which can result in a performance uplift. Additionally, Rage Mode is also available with the RX 6900 XT.

Pricing is where the RX 6900 XT dominates; with an MSRP of $999, the RX 6900 XT provides better value for your money compared to the GeForce RTX 3090.  The outrageously high MSRP of $1499 of the GeForce RTX 3090 makes the RX 6900 XT a better option for those on a budget.

In terms of the gaming performance without ray tracing, the 6900 XT trades blows with the GeForce RTX 3090, which is impressive, especially considering the lower price of the RX 6900 XT.

In conclusion, the 6900 XT is a solid option for anyone looking to get into 4K gaming while also not breaking the bank; however, if you want the Nvidia-exclusive features such as DLSS, then the GeForce RTX 3090 would be the better pick. On top of that, the GeForce RTX 3090 performs better in professional workloads.

TITAN RTX vs RTX 3090 

Before the release of the GeForce RTX 3090 and the GeForce RTX 3090 Ti, the Titan RTX was one of the most powerful graphic cards one could get their hands on. Even in 2023, its performance is comparable to the GeForce RTX 3090.

While Titan RTX was powerful, it came with a hefty price tag of around $2500. Compared to that, the newer GeForce RTX 3090 is much cheaper.

Since the Titan RTX is an older GPU, it is based on the old Turing architecture. It uses 24 GB of GDDR6 memory, with a 384-bit memory interface. It features a total of 4608 Cuda cores, and 576 Tensor cores.

Since the Titan RTX uses the older Turing architecture, it also consists of 1st generation RT cores which are comparatively slower to the 2nd Generation RT cores present in the newer GeForce RTX 3090. The GeForce RTX 3090 also benefits from faster GDDR6X memory

In gaming, the cheaper GeForce RTX 3090 outperforms the Titan RTX in almost all modern Triple-A titles. While the Titan RTX may be able to pull ahead in productivity, the much affordable and newer GeForce RTX 3090 is a no-brainer when it comes to gaming.